Application Commercial
Description
Fire and smoke door magnetic holder, titanium alloy surface finished, elegant appearance. Installed on fire and smoke doors in projects where doors are required to be held in the open position for both pedestrian and general traffic, the devices have to be linked into a buildings fire/smoke alarm system.
When an alarm occurs, power is removed from the devices and the doors are returned to the closed condition, preventing the spread of fire and/or smoke to other areas. The devices are fire tested
to a rating of 4 hours and are supplied either
12 or 24VDC.
Warranty
Mechanical - 2 years
Electronic - 1 year
Finish - Refer to allegion.co.nz/finisheswarranty
Part No. | R40PCH12(12Volt) R40PCH24(24 Volt) |
Holding strength | Up to 25kg |
Voltage/ Current | 12VDC/160mA 24VDC/80mA |
Size | H = 59X W= 59 x D = 108mm |
© Allegion plc, 2022 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland
REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 527370
Allegion is an equal opportunity and affirmative action employer